If you are looking for China golden supplier and China good supplier anticorrosion waterproof black woven polypropylene coating tape, good quality and high quality anticorrosion waterproof black woven polypropylene coating tape, please feel free to contact Jining Qiangke Pipe Anticorrosion Materials Co.,Ltd.

anticorrosion waterproof black woven polypropylene coating tape

System Description                                

anticorrosion waterproof  black woven polypropylene coating tape is designed for the corrosion protection of new and existing pipelines. The coating layer consists of a  tough, woven polypropylene backing with a high tack butyl rubber adhesive. An  additional layer of POLYKEN 980 or 955 should also be used on pipes larger than  12" diameter to improve the soil stress resistance of the system. It is designed for the corrosion protection of new and  existing pipelines. The coating layer consists of a tough, woven polypropylene  backing with a high tack butyl rubber adhesive.
It’s  also used for both metallic pipelines and waterproofing works against outdoor  bad weathers .
The product, safe and clean, performs well in insulation,  anticorrosion, mechanical strength and anticollision, moreover it is of low  water absorption, long service life, wide usage and convenient in application.  It is extensively used in the pipework of oil and natural gas transportation, petrochemical industry, electric power, metallurgy, urban natural gas network  of pipes, the outside anticorrosion project of the metal pipes involved as well  as the outside anticorrosion project of the underground and overhead metallic  conduit of the works of petrochemical industry, natural gas and coal  transportation.
Anti corrosion adhesive  tape can be used extensively in metal pipes of all pipelines and facilities in  petroleum, natural gas, petrochemical industry, electric power, metallurgy,  urban gas pipeline network and water supply etc. For efficient and long lasting  outer anti corrosion.

Structures 

Uses 

Waterproofing-
-Waterproofing  membrane for basements,sub structures and flat deck applications. plazas,  bridge, vehicular traffic structures, or parking decks overlaid with an asphalt  concrete wearing course.
-Tough, high performance waterproof  membrane for critical substructures and civil engineering works.
-Provides a vapor and waterproof  membrane to water excluding structures and protects concrete from attack by  aggressive ground salts.
-Protection for  wall ,floor, roof, corner, basement etc. to against from attack by bad weather, rain, acid alkaline salt
Pipelines  protection

 _ Weld joints

 _ Bends

 _ Fittings

 _ Bare pipe lengths
 _ Pipe rehab and repair

 _ Bare pipe length

 _ Line travel  pipelines

Features   

_ Excellent adhesion to pipe and self _ Flexibility provides extra protection at vulnerable  areas _ Compatible with generic plant coatings _ Low cathodic protection requirements

_ Can be applied over a wide temperature range _ Good conformability and consistent uniform thickness             _ Heavy duty butyl adhesive ensures a strong bond  & impervious seal.

Technical Datas 

PROPERPTIES	UNIT	TEST METHOD	TYPICAL VALUES
			POLYKENGTC 40	POLYKENGTC 50	POLYKENGTC 60	POLYKENGTC 65
Total thickness	mil	ASTM D 1000	40mils(1.0mm)	50mils(1.27mm)	60mils(1.52mm)	65mils(1.65mm)
Tensile Strength	Kg/cm	ASTM D 1000	35	35	35	35
Peel adhesion        To primed pipe	Kg/cm	ASTM D 1000	25	28	30	34
To backing	Kg/cm	ASTM D 1000	20	25	26.5	28
Dielectric Strength	KV/mm	ASTM D 1000	20	23	26	30
Water Absorptivity	%	ASTM D 570	0.1	0.08	0.08	0.06

Ordering Information
POLYKEN GTC  
Eg.: POLYKEN GTC 4"×50'

POLYKEN GTC	Product Model No.	Standard ordering options
50	Total tape    thickness in mils	40mils(1.0mm),50mils(1.27mm),60mils(1.52mm),65mils(1.65mm)
4	Tape width    in inches	2"(50mm),,4"(100mm),6"(150mm),
50	Tape roll    length in feet	50ft(15M),100ft(30M)